It learns your lawn, so you don’t have to.

WORX Landroid robotic mower on a lawn. Maps your garden for you: no wires, no measuring and no complicated setup. Sees what’s in the way: it steers around balls, toys and garden features.

Less lawn work. A few predictable checks.

Low maintenance, not zero maintenance. Here is what changes when a robot does the regular cutting.

Side view of the WORX Landroid Vision M robotic mower, showing the Cut to Edge side panel, rear drive wheel with orange hub and the control panel on top.
  • No catcher bag to empty.Each run takes off a little, so the short clippings stay on the lawn. There is no grass bag in ordinary operation and no routine raking of the fine cuttings.
  • It goes back to charge by itself.When the battery needs recharging it stops cutting, returns to its base and docks on the charging contacts. It carries on when its schedule and conditions allow.
  • Upkeep is small and regular.Clear grass from the underside and wheels, check the small blades as they wear and keep the charging contacts clean. Vision owners also keep the camera and the base’s QR code clean.

One loop, repeated all season.

Cut, head home, charge, carry on. The cutting disc is off for the whole trip back.

The Landroid recharge loop A closed loop around a lawn. From the charging base the mower heads out and cuts (solid orange line). When the battery needs charging the cutting disc stops and the mower drives home with the disc off (dashed line). At the powered base it docks on the charging contacts and charges (green), then resumes when its schedule and conditions allow. Your lawn clippings stay here Base powered 1 2 3 4 5 cutting disc on cutting disc off, driving home
  1. Cuts little and often

    It works through its schedule, taking a small amount off each time.

  2. Stops the cutting disc

    When the battery needs recharging, the disc stops before it leaves for home.

  3. Drives back to its base

    How it finds the way depends on the model. Vision reads a QR code; wire models follow the perimeter wire. See both.

  4. Docks and charges

    It drives onto the charging contacts and charges from the base. The base must be powered and reachable.

  5. Carries on when it should

    It resumes only when its schedule and conditions allow, so a full battery on its own does not mean it heads straight out.

Two ways to find home.

Every Landroid returns to its base to charge. Vision models and boundary-wire models get there differently, so the setup and the checks differ too.

Front view of the WORX Landroid Vision M robotic mower, showing the orange Landroid and Vision M front covers, the silver front assembly and the red stop button on top.
Pictured: a Landroid Vision model. Each product listing states its return method.

Landroid Vision

It looks for the QR code on its charging tower.

How it finds the base
The mower’s camera identifies the QR code on the charging tower. WORX says Vision reads the code to find the base, not Wi-Fi or Bluetooth.
What the base needs
Power, a stable and level spot, and a position and orientation that suit the mower’s planned approach, with a clear path to it.
What you keep an eye on
The QR code stays clean and in view from the approach. Leaves, grass or dirt over the code can stop the mower recognising its base.
Official WORX installation illustration, step 6, in two panels. Left, marked with a green tick: a clean charging base with the black-and-white QR code on its tower clearly visible, shown enlarged in an orange circle. Right, marked with a red cross: the same base covered with leaves and the enlarged QR code obscured by dirt.

Right. Base clear, QR code clean and visible.

Wrong. Leaves on the base, code smeared.

Official WORX Vision charging-base installation illustration.

Boundary-wire Landroid

It follows the wire you installed.

How it finds the base
It follows its installed perimeter wire back to the charging base. It does not use the Vision QR code.
What the setup needs
A powered base in a stable position, and the boundary wire installed correctly around the lawn.
What you keep an eye on
Clean charging contacts and a clear approach to the base. Alerts and fixes differ from Vision, so use your model’s manual.

Clippings, rain and the little jobs.

Clippings stay on the lawn.

Because each run takes off only a little, the cuttings are small and are left where they fall. There is no catcher bag to empty after a normal cycle.

Starting on long or overgrown grass? The first runs can leave more visible clippings while the lawn comes down to height. Give it a few cycles.

Low rear three-quarter view of the WORX Landroid Vision M robotic mower, showing the treaded drive wheel with orange hub, rear lights and the Cut to Edge panel.

When it rains, it waits.

On Vision models, a rain sensor can send the mower back to its station. It waits out the rain delay you have set, then resumes if its schedule allows.

Rain-sensor and restart behaviour varies by model. Check the manual for your exact Landroid.

Rear three-quarter view from above of the WORX Landroid Vision M robotic mower, showing the display and control dial, PowerShare battery cover, carry handle and Cut to Edge side panel.

The mower looks after

  • Regular cutting to its schedule
  • Returning to its base when the battery needs charging
  • Leaving the fine clippings on the lawn
  • Pausing for rain on models with the sensor

You check now and then

  • Grass and debris under the deck and on the wheels
  • The small blades: inspect, and replace as they wearFollow your manual’s safety steps before handling blades.
  • Charging contacts on mower and base, kept clean
  • Vision only: camera lens and the base’s QR code, clean and visible
  • Cleaning: Vision manuals say use a regular garden hose, never a pressure washerNot every Landroid can be hosed down. Check your model’s manual first.

Sources: routine maintenance guidance and Vision manuals.

If a run is interrupted.

Status messages help you see what happened. They point you to the fix; they don’t mean every problem sorts itself out.

A Vision mower stops mowing when it detects a problem or a safety condition, and its blade disc stops automatically if it is lifted. Depending on model, connection and settings, the display or app may show messages such as:

  • Mower trapped
  • Blade blocked
  • Charging or base issue
  • Rain delay

Not every model sends every notification to the app.

Vision can’t find its base

Work through these in order, following the WORX troubleshooting path.

  1. Check the base placement and that the approach to it is clear.
  2. Make sure the QR code on the tower is clean and visible.
  3. Confirm the base has power.
  4. Check the mower can reach the charging contacts.
  5. Clean the camera.
  6. Still not docking? Follow the error message and your mower’s manual, or contact WORX support.
It stopped and shows a message

Read the message on the display or in the app, then look it up in the WORX list for your model. The right next step depends on what it says.

I have a boundary-wire model

Wire models have different alerts and remedies from Vision. The correct reset step depends on the model and the error shown, so start with your manual and the WORX support pages.

Before you start: one-time setup
  • A powered charging base in a stable, level position with a clear approach.
  • Vision: the QR code visible from the mower’s approach.
  • Wire models: the boundary wire installed correctly.

Two ways to a well-kept lawn.

Boundary wire or Vision AI? Compare how each Landroid works, then choose the mower that fits your garden.

WORX Landroid

Boundary wire

Define the lawn with a wire.

WORX Landroid boundary-wire robotic mower

Range image shown; check the selected model.

Choose lawn coverage
R 9,999WR165E

Available to order

View boundary-wire mower
WORX Landroid

Vision AI

Let the camera read the lawn.

WORX Landroid Vision AI robotic mower

Range image shown; check the selected model.

Choose lawn coverage
R 19,999WR206E

Available to order

View Vision AI mower

Choose by mowable grass area, not total property size.

The differences that matter.

Both mow regularly and return to their charging station. How they find their way is the main difference.

WORX Landroid boundary-wire and Vision AI comparison
Landroid Boundary wireLandroid Vision AI
Boundary & navigation

A perimeter wire defines the mowing area. AIA navigation helps it negotiate suitable narrow passages.

Boundary & navigation

A camera and AI identify grass, edges and obstacles. No perimeter wire or satellite antenna is needed.

Installation

Lay and connect the wire, position the charging station, then set the mowing schedule.

Installation

Position the charging station and check the lawn boundaries. Some gardens need magnetic strips and RFID tags.

Edges & obstacles

Cut-to-Edge reduces trimming at suitable borders. Standard obstacle response is contact-based; ACS obstacle avoidance is an optional add-on.

Edges & obstacles

Built-in camera-based obstacle avoidance. Cut-to-Edge reduces trimming at suitable borders. Protect ponds, drops and ambiguous grassy boundaries as the manual requires.

Multiple lawn zones

Program start points for connected areas within the same wire loop. Fully separate lawns may require carrying the mower or a separate charging setup.

Multiple lawn zones

RFID tags guide travel between suitable connected zones. Routes and tag positions must meet WORX requirements; closed-off lawns still need separate planning.

Garden layout

A good fit when you want to define an exact perimeter and exclude planted areas with wire. Passage widths and boundary slopes still matter.

Garden layout

A good fit for lawns with clear grass-to-non-grass edges. Adjacent grass, protected planting and complex passages can need extra boundary preparation.

App & connectivity

Landroid app control and Wi-Fi. WR165E and WR147E.1 also list Bluetooth; it is not listed for WR155E.

App & connectivity

Landroid app control, Wi-Fi and Bluetooth on both locally listed models. Wi-Fi enables over-the-air updates.

Ongoing care

Clean the mower and charging contacts, inspect and replace blades, and check or repair the boundary wire when needed.

Ongoing care

Clean the mower, camera and charging contacts, and inspect and replace blades. Check any installed strips and tags; there is no perimeter wire to repair.

Coverage & slopes

500, 1,000 or 2,000 m², depending on model. All three listed models are rated for slopes up to 35%.

Coverage & slopes

600 or 1,300 m², depending on model. Both listed models are rated for slopes up to 30%.

Included & optional

The local listing confirms mower, battery and charging equipment. Confirm wire and peg quantities for your chosen kit. ACS, Off Limits and tracking modules are optional.

Included & optional

The local listing confirms mower, battery and charging equipment. WORX EU kits list RFID tags and magnetic strips; confirm local quantities. Headlights and compatible tracking are optional.

Current mower prices

R 9,999–R 19,999. Current listed mower prices; accessories and installation are separate.

Current mower prices

R 19,999–R 24,999. Current listed mower prices; accessories and installation are separate.

Coverage and slope figures are model limits, not a guarantee for every lawn. Slope percentages are gradients, not degrees. Check the selected model’s manual for stricter limits at boundaries and passages. Both ranges may leave edges that need manual trimming.

Start with your garden.

Measure the grass.

Add up the areas you want mowed. Choose enough rated coverage for the lawn, then consider slopes and narrow sections.

Check the boundaries.

Prefer an explicitly wired perimeter? Start with boundary wire. Prefer camera-based navigation? Check that Vision can clearly recognise your lawn edges.

Plan the routes.

Check access between lawns, charging-base space, nearby power and Wi-Fi. Discuss ponds, drops and difficult passages before ordering.

Unsure which suits your lawn?
Share your grass area, garden photos, slopes and access between lawn zones with Smart Mower.

Ask Smart Mower
Specifications, sources & kit details

Specifications checked 5 October 2026 against official WORX product and support pages. Prices and order availability are read from the store. Exact local wire, peg, RFID-tag and magnetic-strip kit quantities still need confirmation for your selected model.

This comparison covers WR165E, WR147E.1, WR155E, WR206E and WR213E. For other models, use the exact model specifications. Cleaning instructions and accessory compatibility vary by model.

Choose the Landroid that suits your lawn.

Compare Vision and boundary-wire models in the Smart Mower range. Each listing gives the return method and the facts for that exact model.

Top-down view of the WORX Landroid Vision M robotic mower, showing the red stop button, display and dial, PowerShare battery cover, carry handle and orange Vision M and Landroid front covers.